Vehicle Spy 3 신규버전 출시! (800.98)

Vehicle Spy 3 사용 고객 여러분께,

저희 인트레피드 컨트롤 씨스템즈의 대표적인 소프트웨어인 Vehicle Spy 3의 신규 버전 (3.8.0.98)이 출시 되었습니다.

유효한 라이선스를 가지고 계신 고객이라면 무료로 다운로드가 가능하며 만료된 라이선스로 사용 중 이신 고객이라면 유지보수 갱신 후 사용 가능합니다. (나의 Vspy 라이센스가 유효한지 알아보기)

다운로드 및 유지보수 갱신 관련 문의는 ICS Korea 로 연락 주십시요.

이번 버전에서는 주로 FIRE2 관련 기능들이 개선 되었고 기타 여러 bug 들이 fix 되었습니다. 
상세 릴리즈 노트는 아래 "Read More" 를 클릭해 주세요. 

​감사합니다.

Vehicle Spy 3 version 3.7.1.87 to 3.8.0.98 release notes
 
Major New Features      This list will be in the What's new video
neoVI FIRE2 can now use CoreMini
RAD-Galaxy is now a fully fledged Logger and Bench tool
Video (Axis and web cam)
New VehicleScapeDAQ UI
New Network Selector UI
 
Bug Fixes          
neoVI Explorer  
Added IFS shift panel for Slave VNETs
Added Selectable CAN Termination for Fire2
Changed "Selectable CAN" to "Selectable Networks" for the Fire2 VNET
Changed default for "Send Bus Traffic to Android" to Enabled
Explorer can now check Linux version and SD Card content even if not fully connected and powered
Fixed a bug where Load Defaults would enabled J1850 on a Plasma (which doesn't support it)
Fixed some panels using Textboxes instead of Labels
Fixed the scrollbars not working for Product Details and Available Firmware
Fixed the SD Card Test not working correctly
Made it clearer how to change Selectable CAN
neoVI Explorer now populates available settings after the device is connected
UART and LIN now correctly grey out when disabled
CAPL Converter Fixed a bug when converting certain J1939 CAPL Projects
Fixed an import issue on certain CAPL projects
Fixed CAPL Conversion on certain setups
CoreMini          Added a warning that CoreMini only supports 3 nested loops
Added a warning to the CoreMini Compiler if a Replay block contains negative timestamps
Axis F44 Cameras are now supported in CoreMini
Fixed a bug where CCP polling wouldn't work if CoreMini Optimization was turned off
Fixed a bug where copying Rx Message Bytes to Tx Message Bytes wouldn't always work
Fixed an Access Violation when running CoreMini compiler on particular UART setups
Fixed AutoTx on Rx not working on certain networks
Fixed Message Bx property for Ethernet Messages
Fixed neoVI Mote triggers sporadically being missed by the device
Fixed the Message BX property not working properly in CoreMini
Fixed Wait Until with Timeout not working properly on neoECU10
Tx Message Count property now updates when it should for all CoreMini messages
Data Analysis     Data Analysis now supports MF4 files
Data Analysis Zoom 'distance' is now more consistent
Fixed a bug when saving signal data in Data Analysis
Fixed a bug where Data Analysis MDF files weren't saved correctly
Fixed a bug with Data Analysis where Duplicate Records would corrupt table view
Fixed a crash in Data Analysis after changing tabs
Fixed a crash in Data Analysis when switching between two files
Fixed a crash with Data Analysis
Fixed a crash with Data Analysis when importing CAN-FD VSB Files
Fixed an Access Violation in Data Analysis while Vehicle Spy is running
Fixed the Data Analysis Open File Dialog, it now shows MAT files when "All Supported" are selected
 
Ethernet          
Added support for PCAPNG files (for Ethernet)
Added support for reading Ethernet in ASC files
Diagnostics View Tree / List now displays DoIP Information if the job is a DoIP Job
Ethernet logging now starts quicker
Fixed a bug that caused an Access Violation (and all Ethernet NICs to disappear) with certain WiFi adapters
Fixed a bug where Ether Type IEEE1722 would be saved missing a few parameters
Fixed a bug where IPv4 UDP/TCP Frames would display the incorrect port on the Messages View
Fixed a bug where the EEVB could try to transmit before the driver was fully initialized
Fixed a bug where Tx Ethernet Message Signals weren't updated correctly by Function Blocks
Fixed a crash when sending too short of Ethernet Messages
Fixed an Access Violation after removing networks
Fixed an Access Violation when using the Tx Panel to change VLAN Setting for an IPv4 Ethernet message
Fixed an issue with TCP Payload causing flickering in the Messages View
Fixed IP and Port from getting reset when protocols are switched
Fixed 'Message Data' property for Ethernet messages not grabbing the correct section
Fixed Vehicle Spy from sending ICMP "Port Unreachable" when receiving UDP messages
Improved the way that Ethernet messages are handled so the 5000 Unique Message Limit isn't hit so quickly
Increased TCP/IP to allow up to 128 connections at once in Vehicle Spy
Listen for incoming TCP Connections is now a selectable property of Ethernet Rx Messages in Expression Editor
Modifying signal size of Ethernet Messages now properly works with mouse dragging
Removed the '5000 Unique Message Limit' on the Messages View
Standard Ethernet signals are now editable
TCP Network Transmit Messages now open new TCP connections properly
 
Extract / Export
Exporter now selects VSDB Signals by default
Fixed a bug where Review Buffer didn't open from the Extract/Export page
Fixed a crash while using VSA Extractor
Increased the file limit for the Extractor above 2000 files
Added a timeout in Extract/Export if we detect a SD Card issue
Added additional information to the extracted Notes.txt file: names of the VSA records, and if the card was wrapped
Diagnostic file names are now included in the XMLs from Extract/Export
Ethernet is now supported in ASC Files
Extract now stops if there's no more room on the hard drive
Fixed a bug when exporting a negative 2's complement integer
Fixed a bug where Bus Query DID Decodings were incorrect
Fixed a bug where CSV timestamps could be thrown off by discovery messages
Fixed a bug where local time conversion happened twice on certain messages
Fixed a bug where some data would be lost when extracting an overlapped card
Fixed a crash if the export was cancelled partway
Fixed an Access Violation when clicking 'Remove Unused' in the Export Tab
Fixed an Access Violation when going to File > New while extracting
Fixed an incorrect DTC Status decoding from XML Report from Extract/Export
Fixed an Index out of Bounds error when removing unused signals in Extract/Export
Fixed combining VSB files using Ctrl+Shift+B
Fixed Multiplex signals not exporting correctly
Fixed some GUI Artifacts on Export Tab Checkboxes
Fixed the Extraction Start/End Time from resetting to default if "Advanced Settings" was clicked
MDF Extension in Extract/Export now shows MDF Versions
Retooled the Messages Editor to be a bit easier to use with Ethernet Messages
 
Firmware
Added 5M CAN-FD baud rate, and baud rate setting controls for HSCAN2-7 to the API
Added a tab in the API Helper tool to show installed DLL Versions
Added an Ethernet Settings panel for applicable devices
Added an option for all Ethernet Transmits to be padded to 60 bytes
Added API support for parallel transmits of Long messages (for supported devices)
Added API Support for reading FlexRay and MOST with compatible devices
Added API Support for Slave VNETs
Added support for ISO15765-2 Messages with CAN-FD
Added support for selectable CAN Termination in the J2534 API
DeviceID is now 1 after PassThruOpen succeeds
DPS Support now exists for CAN-FD
Fixed a bug when using SWCAN ISO15765-2 messages
Fixed a bug where a Fire2 could get in a state where it wouldn't transmit Ethernet and require a repower
Fixed a bug where a FireVNET would lose communication
Fixed a bug where a LIN3 or LIN4 buffer overflow would lock up those buses until next power cycle
Fixed a bug where Fire2 or Plasma/Ion would read incorrect values for Battery Voltage
Fixed a bug where FlexRay overflow messages were logged as ISO9141 Frames
Fixed a bug where SW2 would not trigger a wakeup
Fixed a bug with ISO Fire2s where a shorted bus wouldn't recover correctly
Fixed a bug with Timestamp Resyncs on Fire2 and Fire VNET
Fixed a DLL Buffer Overflow with RADGalaxy
Fixed a Message Packet Frame Error when going online with the EEVB
Fixed an EEVB lockup when sending oversized messages
Fixed API error text on certain conditions
Fixed CAN Termination settings not 'sticking' after a Fire2 Reflash
Fixed messages being overwritten when a buffer was overflowed
 
FlexRay
VNET now handles bad frames better.
Increased the size of the Ethernet Tx buffer on Fire2s for better performance
ISO CAN-FD (if available) is now the default CAN-FD Mode
NeoVI DLL now no longer writes settings to the hardware if nothing's actually changed
Updated the API to allow for CANFD and Ethernet transmitting
FlexRay Added a scrollbar to the ECUs View Flexray configuration tab
Added remote wakeup option for Flexray
Added significant improvements to the Flexray Clusters Data View
Added some new features to Flexray Cluster view
Added some tweaks to the handling of partial Flexray frames
Added support for Flexray in Simulator
Changed Flexray Clusters View to more reflect its function
Changed the way that NULL Flexray frames are handled in the Messages View
Fixed a bug that would hide the Cluster Drift Dampening in ARXML from the user
Fixed a bug when loading clusters from certain Flexray ARXMLs
Fixed a bug when setting a hotkey for a Flexray message where the same hotkey was set for all other present Tx Messages
Fixed a bug where certain FlexRay Databases weren't being imported correctly
Fixed a bug where Flexray NULL frames sent by Vehicle Spy weren't caught by the Tx filter
Fixed a bug where Flexray receive messages were decoded as Report Messages on CAN
Fixed a bug where Flexray settings were saved even if the setup doesn't use Flexray
Fixed a bug where Flexray values would be set to default when the POC is set to ready
Fixed a bug where Null frames and Raw frames for Flexray were caught by the same discovery message
Fixed a bug where the Flexray Restart Cluster action needed to be pressed twice to actually restart the nodes
Fixed a bug where the Flexray slot ID wasn't saved correctly
Fixed a bug with Flexray where an Rx message would decode more than it was supposed to
Fixed a bug with Flexray where Tx messages with Slot ID > 839 was only seen as a Rx message
Fixed a crash when changing Flexray Startup Sync/Slot ID
Fixed a missing scrollbar on Flexray Cluster view
Fixed an Access Violation in Flexray Cluster view
Fixed an Access Violation in Flexray ECU Configuration tab
Fixed an Access Violation when editing an ECU's Flexray Configuration
Fixed an Access Violation when going online with more than 128 Flexray Tx messages configured for one node
Fixed an Access Violation when reviewing certain VSBs
Fixed an External Exception when pressing the Execute button in Flexray Clusters
Fixed Database Import of State Encoded FlexRay messages not importing correctly
Fixed Flexray decoding of POC State and CCSV Register to be displayed correctly
Fixed FlexRay PDUs displaying incorrectly when reviewing FlexRay ASC files
Fixed getting Flexray Clusters stuck in a certain state if 'Restart' is pressed too many times
Fixed Node Settings in Flexray Clusters to be saved with the VS3
Fixed the Rate counter to be more accurate with Flexray
Fixed up Flexray Symbols to display correctly in the Messages View
Fixed up some bugs in the FlexRay simulator
Flexray can now use wildcards for a byte entered in Hex
Flexray ECU Configuration tab now disappears if ECU network is switched
Flexray frames imported from ARXMLs no longer filter out NULL frames
Flexray messages can now be imported from FIBEX databases
Flexray now displays length of messages correctly
Flexray NULL messages are now decoded if they're found in the database
Flexray POC State now changes properly when faced with error conditions
Flexray raw traffic is supported in Basic
Flexray Slot IDs are now displayed in Dec
Frame HCRCs are now displayed on ECU Settings for Flexray Cluster View > Setup page
Frames in Flexray Clusters View now show before going online
Improved the Flexray Message Buffers view with some tweaks
Made multiple improvements to the Flexray Cluster Setup page
Reworked the Flexray Cluster View > Cluster Setup page
User now has the option to select Continuous or One-shot mode for Flexray Tx Messages
Users can now change the length of Dynamic Tx Flexray Messages while online
 
FSA     
Added properties in the Expression Editor to control FSA Header Information
Fixed a bug where FSA wasn't decoded correctly
Fixed a bug where Simulation FSA messages weren't displayed in the Messages View
Fixed a crash when changing a message's network from FSA to any OPBR network
FSA buffers now show the correct source node in the messages view
FSA byte signals are now editable
FSA Properties can now be edited in Function Blocks
FSA Replay Wizard's generate button now properly refreshes views
Message Properties B1-B8 are renamed to their equivalents in FSA messages
Vehicle Spy now handles FSA messages with large payloads more gracefully
When using FSA Replay, the names of the autogenerated messages are a bit easier to understand
 
Graphical Panels
Added a Bring to Front option for floating panels
CTRL+Clicking an item no longer selects objects behind objects in Graphical Panels
Fixed a bug when importing Graphical panels where Application Signal Arrays were imported as separate signals
Fixed a bug where Graphical Panel Imports wouldn't create Application Signals correctly
Fixed a bug where graphs in floating panels where they didn't stay in place when scrolling
Fixed a bug where importing a Graphical Panel would add messages that were already defined
Fixed a bug where State Encoded Signals wouldn't show properly on Graphical Panels
Fixed a bug where the Messages View on Graphical Panels where signals decoded as blanks
Fixed a crash with certain VS3s
Fixed an Access Violation and Crash when removing signal plot items while online
Fixed an Access Violation on certain older setups
Fixed an Access Violation when changing graphical panels on certain setups
Fixed an Access Violation when trying to connect two Radio buttons to a DID with two signals
Fixed an Access Violation when using floating panels
Fixed an invalid class error when opening a Floating Panel
Fixed the Calculator allowing you to add mathematical operators that didn't make sense
Fixed the text with Graphical Panel Knob Controls from overlapping the knob
IP Addresses now display correctly on a Graphical Panel
Made the number of Signal Plot points on Graphical Panels user-customizable
Moved meter captions to underneath the meter on Graphical Panels
The pause button in the Graphical Panel Graph control now pauses collecting (as opposed to just pausing tracking)
 
Hardware
Fixed a bug where if Multiple Devices was checked, Autodetect hardware wouldn't work properly
Fixed Ethernet stack to not send Ethernet messages if hardware doesn't support it
Fixed up a few misc items on the Networks View
Networks table now correctly shows baud rates for Fire2 HSCAN6/7
Removed the 'Report GPS Coordinates' option for Non-GPS enabled devices
Slave VNET Transmission has been greatly improved
Slave VNETs now clear the LIN Slave table when going online
The Messages Editor's Network Selector has been totally redesigned!
The Networks View now shows CAN FD Baud Rates in the Messages View
The Restricted Mode page now shows the connected serial number
The VNET MPIC Updater is now more robust
Vehicle Spy now checks for Baud Rate mismatches on Slave VNETs
Added the option to start CoreMini even if USB is connected for certain devices
Changed the names of some neoVI messages to not include 'PLASMA' as they're used on ION and Fire2 as well
 
Main   
A problem log will now show if we were unable to open a CSV file for logging or writing
Added a 'Function Block Execution Steps' box, which controls how many steps are run each core loop
Added ASCII option for Diagnostic Signals
Added line wrap to Function Block Comments
Added Network Fix Popup on BLF Converter
Added option to remap networks in VSB Split/Combine
Added support for Big Signals (signals > 8 Bytes are now fully supported!)
Added support for CAN-FD .BLF Files
Added support for GM ARXML version 4.2.2
Added TCP to Tx Panel Protocol List and sorted it
Added the ability to import ECU messages from Flexray ARXMLs
Added the currently used license type to the Title Bar
Added up / down arrows to allow sorting of Function Blocks and App Signals
Added Video Recording and Processing support
After saving saved Zipped MDF files, the unused MDF is now cleaned up
Appending signal values to Capture Block names now works as intended and ignores reserved characters
Application Signal "Cut" is disabled when online
Application Signal Toolbar Delete and Cut are disabled while online
ASC Import now works for Flexray
Binary ArbID Entry is now working as intended
Bit Shading in Messages Editor now supports longer signals (and doesn't fade to white)
BLF Files will now correctly display the Network Fixup when imported with unknown networks
Capture Block "Buffer" tab renamed to "Filter" for ease of use
Changed EDL to FDF for CAN-FD (name was updated per ISO Spec)
Changed the text for creating LIN Schedule Tables to be more descriptive
Changing a message color in the Tx Panel now correctly changes color in Messages Editor
Completely reworked the Capture Function Block code to be more efficient
Custom Format can now use Left-side padding
Database equations can now be copied
Deleting items in Extra Bytes table now shows Blank instead of 00
Device Serial Number now will show Fire2 Serials correctly
Disabled 'Pre Start Collection' in PC Logging when Start Automatically is selected
Empty State Encoded signals will prompt the user for entry before saving
Extensible Security now works for CANoe Security Access DLLs
Extract and Delete buttons are now unclickable in Extract / Export if no files are selected
Fixed a bug in Capture Function Blocks where clicking Append Signal to File Name would also check Append Date/Time
Fixed a bug in CSV buffers where multiframe messages had the full payload on the last message
Fixed a bug when importing a VSDB as a database that contained Tx Messages
Fixed a bug when saving a VS3Zip to a folder where a VS3 with the same name already exists
Fixed a bug when saving ASC files where it would say '0 messages skipped'
Fixed a bug when trying to reopen an already open VS3Zip
Fixed a bug where "Add First Element" in Expression Builder would only work once
Fixed a bug where a CoreMini was too large when Optimization is off
Fixed a bug where a function block import would create redundant messages
Fixed a bug where a user could type into a label on the Choose VSB Method Dialog
Fixed a bug where ASC files would jump to negative timestamps
Fixed a bug where ASC files wouldn't decode
Fixed a bug where CAN-FD messages displayed incorrectly when matching multiple filters
Fixed a bug where certain files would crash Split VSB
Fixed a bug where changing a function block Transmit step could modify a currently TXing message
Fixed a bug where clicking outside of a box in Tx Panel still had it think it was clicked
Fixed a bug where CSV Files would actually be VSBs just saved as a .CSV
Fixed a bug where digital signals could get set in an unknown state in Function Blocks
Fixed a bug where DoIP TCP Messages would state Invalid Node
Fixed a bug where editing payload bytes in the Tx Panel for TCP Messages didn't work correctly
Fixed a bug where Fire2 LIN Baud Rate wasn't changing properly with Function Blocks
Fixed a bug where Functional Requests would stop decoding after the first positive response
Fixed a bug where having two identically named ECUs would confuse the Node lookup
Fixed a bug where ISO15765-2 Overflow messages were ignored
Fixed a bug where J1939 DM1 monitor Flash Lamp status would be different depending on if you were in Scroll mode
Fixed a bug where J1979 ECUs wouldn't be exported to ODX correctly
Fixed a bug where J1979 jobs couldn't copy
Fixed a bug where J1979 PID 0 wasn't being saved in the VS3
Fixed a bug where MDX without Routines wouldn't import correctly
Fixed a bug where Min and Max values wouldn't show the correct values for 2's Compliment integers
Fixed a bug where only the first Routine Signal would be exported for ISO14229 ODX files
Fixed a bug where particular VS3Zip files would throw an error and not load correctly
Fixed a bug where remote frames weren't seen by a Fire2
Fixed a bug where 'Run with Transmit' would override the 'Disable All Tx' Button
Fixed a bug where Simulator wouldn't send out correct values
Fixed a bug where Standard DIDs could override customer-entered DIDs
Fixed a bug where State Encoded Signal States would get lost when switching from HEX to DEC
Fixed a bug where static bytes after a blank byte wouldn't be sent correctly
Fixed a bug where the ASC Network Fixup wizard could be left blank
Fixed a bug where the Auto Tx would switch back to default if you clicked the dropdown arrow
Fixed a bug where the Capture Function Block Data Tab was always blank
Fixed a bug where the Encrypt Bytes button would be removed if you deleted an encrypted Security Level
Fixed a bug where the Expression Editor's Test button would remain disabled
Fixed a bug where the Extra Bytes "Fill" feature skipped "FF" as a value
Fixed a bug where the first byte wasn't copied over correctly for Tx Multiframes
Fixed a bug where the first instance of an ISO15765 message wasn't sending data bytes correctly
Fixed a bug where the Flow Control Filter CAN-FD Flag wasn't persisting between saves
Fixed a bug where the Messages Editor Signal Add button would switch from add 64-bit to add 32-bit signal
Fixed a bug where the network fixup wizard would show twice
Fixed a bug where the Network Fixup Wizard's grid dropdown would remain visible after clicking elsewhere
Fixed a bug where the On Network would become 'desynced' from the table below in Messages Editor
Fixed a bug where the screen widget for Floating Panels wouldn't open said panel
Fixed a bug where the Tx Panel GUI Columns would get resized strangely
Fixed a bug where the Tx Panel Periodic On/Off button didn't update correctly if changed via Function Blocks
Fixed a bug where the Up and Down arrows in Messages Editor would duplicate a message
Fixed a bug where the Vehicle Spy Play Button text would get stuck at "Go Online"
Fixed a bug where under certain conditions Signals weren't updated correctly
Fixed a bug where Update Rate (rel) was either 0 or 1
Fixed a bug where User Signals didn't show up in the Expression Editor
Fixed a bug where UUDT Response IDs weren't exported correctly
Fixed a bug where VehicleScape wouldn't wait the full STMIN in ISO 15765-2 messages
Fixed a bug with ASC File Conversion where timestamps were set to now, not source data
Fixed a bug with CAN FD Multiframes causing a crash
Fixed a bug with CAN-FD where long messages weren't updated with every transmit
Fixed a bug with J1979 Multi-PID Requests
Fixed a bug with Simulator where closing with X would cut bytes off of an extra bytes string
Fixed a bug where Simulator wouldn't show the messages correctly in Simulation mode
Fixed a bug with Simulator where default message bytes weren't transmitted properly
Fixed a bug with timestamps when converting from VSB to CSV
Fixed a crash and Access Violation if clicking while a very large VSB file is saving
Fixed a crash if the Capture Block Buffer size was too small
Fixed a Crash in ECU Simulator View
Fixed a crash under certain conditions after going online on the messages view
Fixed a crash when attempting to load an invalid CSV file.
Fixed a crash when exporting certain ISO14229 ODXs
Fixed a crash when going online while switching Views
Fixed a crash when saving PCAP files when reviewing in Streaming mode
Fixed a crash when sending high speed long Ethernet messages
Fixed a crash when simulating certain VSBs
Fixed a crash when trying certain $31 ISO14229 Jobs
Fixed a crash when using the Function Block Search GUI
Fixed a crash while monitoring Signal Plot
Fixed a 'false positive' problem log when running PC logging in Simulation mode
Fixed a hang when loading certain VS3s
Fixed a hover text showing HTML code instead of text
Fixed a loading issue with CAN-FD ASC Files
Fixed a popup in Simulator showing when it shouldn't have
Fixed a problem where DIDs weren't being Imported or Exported correctly
Fixed a resolution issue on the Signal Plot view
Fixed a scrollbar display issue when using split-screen view
Fixed a typo during certain Problem Log entries
Fixed a typo in the CoreMini Console
Fixed a typo of Receipts in a problem log
Fixed Access Violation when editing certain FB Scripts
Fixed an Access Violation and Crash if the buffer size of a Capture Block was too small
Fixed an Access Violation and Crash when loading a Professional Setup in Basic
Fixed an Access Violation if a Jump To 'landing step' was deleted
Fixed an Access Violation on Diagnostic List view after removing a job
Fixed an Access Violation on the Expression Editor when sort by 'Nodes' was selected
Fixed an Access Violation when changing a physical request Diagnostic
Fixed an Access Violation when clicking the Standalone Logging 'Clean' button
Fixed an Access Violation when converting a VSB to a CSV while online
Fixed an Access Violation when creating a new platform while an existing platform is open
Fixed an Access Violation when modifying Signal Groups
Fixed an Access Violation when opening a Flexray ASC file
Fixed an Access Violation when pressing 'Clear Expression'
Fixed an Access Violation when reviewing FSA with certain databases
Fixed an Access Violation when reviewing VSBs generated via "Split and Combine VSB(s)"
Fixed an Access Violation when shift-clicking.
Fixed an Access Violation when switching Platforms on the Diagnostics List
Fixed an Access Violation when trying to convert a blank .CSV file
Fixed an Access Violation when using "Pwr Man Mode" as a Calculated Signal Limit
Fixed an error popup about Focus with certain customer setups
Fixed an External Exception error when opening certain vs3zip files
Fixed ARXML import not importing signals for NM messages correctly
Fixed AutoUpdate not working properly for the ValueCAN.rf
Fixed CAN Remote Frames not being able to be sent with certain networks
Fixed different instances of a GUI Artifact 'Cannot open the file' from showing
Fixed different networks using different \r \n combinations when logging CSV
Fixed ECU Short and Long description not being populated when importing an A2L into an existing ECU
Fixed ECU Simulator so it no longer misses SWCAN NCA Messages
Fixed ExtensibleSecurity Auto-Unlock jobs not retrying properly after a failed security access attempt
Fixed Fire2s not going online when part of a Multiple-Hardware setup
Fixed Flexray Database messages disappearing if Hide Unused Networks was pressed
Fixed FlexRay PDU data not converting properly from VSB to ASC
Fixed Hex Letter entry (i.e. A, B) from only filling half a byte in the Messages Editor
Fixed how Vehicle Spy reacts to a Limited license on the Professional installation
Fixed Import issues with certain ODX Jobs
Fixed LIN ASC files not importing correctly into other programs
Fixed Min/Max values not being imported correctly
Fixed Mode 9 Decodings not working properly in VehicleScapeDAQ Online Tab
Fixed panels accidentally overlapping in Expression Editor
Fixed problem log for when a DAQ is already open for writing to be more descriptive
Fixed Routines changing names after exporting to ODX
Fixed Signal Editor from having a blank Type dropdown in certain conditions
Fixed Signal Plot to hide the 'Show All' button when not dealing directly with a Legend
Fixed simulation mode transmitting when changing playback speed
Fixed some GUI Overlay issues when using Windows Aero themes
Fixed Typos in Vehicle Spy
Fixed the Capture Block Appended Signal to not reset if the checkbox is unchecked and rechecked
Fixed the DTC Decodings from displaying the DTC number twice in a row
Fixed the Extra Bytes in Receive Filter not working for bytes 8+ for CANFD
Fixed the Fire2 Image from 'Blinking' on the logon screen
Fixed the GM Virtual Networks view incorrectly showing certain VNMFs as running
Fixed the 'Multiframe Setup' button getting stuck pressed
Fixed the Networks View > Statistics > Network Rate to be more accurate
Fixed the Pad Messages option in J1979 Services from being partially hidden
Fixed the Signal Editor being limited to 5 Bytes
Fixed the Split VSB function to be able to handle huge files
Fixed the text being off-screen on certain CoreMini setups
Fixed the Undo button in the J1979 ECUs view not to be disabled
Fixed the VSB to CSV conversion to make sure timestamps are correct
Flow controls now send out on the CAN type they came in on (i.e. FD vs Non-FD)
Function Block Cut action is now disabled while online
Function blocks no longer show 'Running' if you go offline
If a license is expired and there are multiple licenses, there is now a sign saying which is expired
Inherit MAC Address in TCP/IP View with a Fire2 now grabs the Fire2's MAC correctly
ISO14229 Bus Query Snapshot now includes Global and Specific Module DIDs
ISO14229 CAN-FD Diagnostics now work as intended
ISO14229 Write DID commands now have the ability to read output from Read DID jobs
J1979 Diagnostics now has correct Functional Address for both 11- and 29-bit
LIN can now create Schedule Tables based on ARXML Files
LIN Schedule tables created from ARXML files no longer import incorrect wait for times
Log Data Files are now cleared when a ValueCAN.RF CoreMini is cleared
Long CAN-FD transmits now match filters with data bytes in Simulation Mode
ManufacturerRev, DeviceSerial, FirmwareVersion from Physical IO now work in PC Mode (used to be standalone only)
Message Signal "Remove" button is now disabled when online
Message Signals now update to the Static Databyte (if available) when a signal is physically modified in the Messages Editor
Messages Editor filter now refreshes after being cleared with the delete key
Messages Editor sorting no longer displays a duplicate of the first message
Mod mathematical operator no longer needs parentheses to work
Networks > Properties > Protocol List is now sorted
ODX/PDX Import view is now sortable
Pasting of messages from different types of networks (i.e. CAN to Ethernet) is now disallowed
Removed confusing blank panel when creating TCP Transmit messages
Renamed Capture Block "Trigger Options" to be more descriptive
Restricted Mode page now shows the attached Serial Number that doesn't have a license
Settings for Signal Group Logging are no longer reset when unchecked
Setup Platforms Dialog now no longer allows 'bad' inputs
Signal Plot pause button now defaults to pausing the collection instead of scrolling. This can be changed in Options
Signals after byte 256 now work correctly with Function Blocks and other non-Messages View areas
Signals more than 64 bits in length are now supported
Slave VNETs are now supported with 'Run with Remote neoVI'
TCP frame shows up in Diagnostics View when DoIP is selected now
Text Application Signals can now be calculated on interval
The + button in the expression editor now autoselects the new entry
The CoreMini Build Tab details have been compacted to contain only relevant user information
The CoreMini compiler limit for CoreMini size is 65535 bytes on compatible devices
The DPS Job now works with the latest version of DPS (4.33)
The mousewheel now works for scrolling in the Flexray Configuration Tab in ECUs View
The Problem Log for too many function blocks with a basic license now has more clear text
The selected Network in the Messages Editor now persists with the save
The wakeup channel is now imported for Flexray ECUs using ARXML
Time commands now properly prepend a 0 to a 01 to 09 digit
Updated the 'Add X bit signal' to include 32, 64, and 128 bits
Updated the UEF Importer and fixed a bug with ECU IDs not saving correctly
Users can now specify the file extension when using Log Data
Vehicle Spy can now load ASC CANFD files with blank message names
Vehicle Spy is now more Multiple-Hardware friendly! Added a dropdown if two or more devices are detected
Wildcards can now be entered into Rx Message Extra Bytes screen
XCP now supports Multiframe Seed / Keys
XCP over Ethernet (XCPoE) is now supported!
You can now double click to select hardware on the logon screen
 
MEP    
A2L Long Identifiers are now shown in more places
Fixed a crash while running both XCP and ISO14229 PC DAQ Logging at the same time
Fixed a possible memory leak in MEP View
Fixed a text overlap bug in MEP view
Fixed an Access Violation when loading large XCP Databases
Fixed CCP A2L Import not setting the correct ArbIDs
Fixed certain A2Ls not importing Memory Information correctly
VehicleScapeDAQ now displays 'disabled for edits' if using MEP and changing PC Logging settings
 
Messages View
ASC files can now be read by CAN Frame description if ArbID isn't available
Edit Memo now works for Error Messages on the Message View
Fixed a bug when sorting CSV files
Fixed a bug where CAN-FD "Add to Rx Message" would store a blank message
Fixed a bug where CAN-FD messages added from Messages View (Add to Rx Message) added an empty message
Fixed a bug where certain CSVs in Run Simulation would show all of the relative times to 0
Fixed a bug where inactive Multiplexed signals would cause bad values to show
Fixed a bug where Nodes on the Messages View could contain disabled ECUs
Fixed a bug where setting Filter = On with no filters enabled in Review Buffer would show a blank list
Fixed a byte display update issue when changing networks
Fixed a crash when reviewing specific 0x104 VSB buffers
Fixed an Access Violation after changing the network on a message copied from the Diagnostics View
Fixed an Access Violation and Crash when pressing the Erase button under certain conditions
Fixed an Access Violation if 'Go To Line' was used while the line column was sorted
Fixed an Access Violation when clicking File > New from certain views
Fixed an Access Violation when dropping a CSV file onto the Messages View
Fixed an Access Violation when streaming certain VSB Buffers
Fixed extra Carriage Return Line Feed when saving ASC file with LIN
Fixed Message View "Find" to work for Line / Count again
Fixed random grid lines from showing up on the Messages View
Fixed stability with extremely high EEVB traffic
Message View Count now starts at 1 after filtering in the Messages View instead of place in the 'total' file
Messages that match a database message but have an incorrect length now have the DLC highlighted in red
Messages View Find box is now sorted alphabetically
Messages View Find selection list is now sorted
Messages View now has RADGalaxy BR networks in the filter panel
Messages View Setup Dialog Close button no longer clears Buffer File name
Out of Order TCP Segments no longer cause the TCP reviewer to be confused. It will now sort out-of-order streams
Review Buffer Streaming mode now starts at line 1, not 0
The BLF Exporter no longer allows null or incorrect Network IDs
You can now use the delete key to remove ECUs (with a popup, of course)
You no longer get the Network Fixup box if you try to save an empty ASC file
 
neoVI DLL
Fixed J2534 DLL stating the incorrect version
J2534 Logging now detects Fire2/Plasma/Ion as correct device
Updated the J2534 DLL to support CAN-FD
 
J2534 Device Specific DLL        
Added DLL Support for ISO CAN-FD (if available)
Added SWCAN2 Support for the Fire2 in the device specific DLL
Fixed a bug where a CAN TX error was read as a CAN-FD Rx message in J2534
Fixed a bug where a loopback message was tagged as a new CAN-FD message
Fixed a bug where CAN-FD messages weren't being sent as CAN-FD
 
neoVI Flex
Optimized neoVI Flex's Transmit code
 
neoVI Server
Fixed a bug where Plasma and ION wouldn't perform K-Line inits correctly
Fixed a bug where 'Run with Remote neoVI' wouldn't work if Server was enabled
Fixed a bug where the SD Card wouldn't reconnect if a slave VNET was under heavy load
Fixed a crash when going offline with a unit disconnected
Fixed a possible driver overflow with the FlexRay VNET
Fixed an Access Violation when using a Plasma or ION with MEP
Fixed an unreadable popup message when updating PLASMA / ION firmware
FlexRay VNETs now support much higher bandwidth
 
RAD-Galaxy
Fixed a bug where the RAD-Galaxy would 'blink' on the Logon Screen
RAD-Galaxy now supports Logging
RAD-Galaxy now supports Power Management
 
ValueCAN.rf
CoreMini Console now correctly reports errors when SD Card data failed to be cleared
Fixed a bug with Pre/Post trigger on VCAN.rf
Fixed a bug with the VCAN.rf where it wouldn't wake correctly
ValueCAN.rf can now log in Standalone with a Current Time based trigger
ValueCAN.rf can now send K-Line messages on LIN 1/2
ValueCAN.rf Extractor now will correctly extract even if the file only contains Pre/Post logs
 
VehicleScapeDAQ
Added a dropdown for Messages per second, that controls Pre/Post trigger capture size
Added a Single Shot request for J1979 OBD Acquisition in VehicleScapeDAQ
Added option in PC Logging to change MDF data type and extension
Added support for XCPoE
Added support in VehicleScapeDAQ for 64GB Cards
Adding an application signal to the channels list no longer causes a problem log
Cleaned up how VehicleScape generates things in the background
CoreMini Console now properly displays the correct error when trying to generate more than 16 Collections at once
Diagnostic Tweaker now correctly shows the correct icons again for each state
Fixed a bug where adding Request All DTCs in VehicleScapeDAQ for one ECU ended up polling them all
Fixed a bug where 'Force Restart' wasn't working correctly
Fixed a bug where J1979 PIDs would not be queried correctly in VehicleScapeDAQ
Fixed a bug where Keyword2000 would stop updating in VehicleScapeDAQ
Fixed a bug where K-Line Init frames weren't being sent correctly in Standalone
Fixed a bug where Standard Gateway Configurations wouldn't save correctly
Fixed a bug where switching from periodic to one-shot ISO14229 in VehicleScape wouldn't actually do one-shots
Fixed a bug where the Logging button from VehicleScapeDAQ Online View wouldn't stop quick enough
Fixed a bug with , vs . for numerical groupings (i.e. Europe's 1.000 vs US's 1,000) in VehicleScapeDAQ
Fixed a bug with MEP and Hardware Acceleration
Fixed a crash and Access Violation in VehicleScapeDAQ
Fixed a crash and Access Violation with certain Standalone Setups
Fixed a crash in PC Logging when pressing Restart on a MDF file
Fixed a crash when generating a Gateway with VehicleScapeDAQ
Fixed a crash when spamming Restart in PC Logging
Fixed a GUI Cutoff in Advanced Generator Options
Fixed a GUI issue in VehicleScapeDAQ Standalone Logging
Fixed an Access Violation on VehicleScapeDAQ Channels List
Fixed an Access Violation if a node without Diagnostic Addresses was selected in VehicleScape 'Select ECUs' list
Fixed an Access Violation if a VSSAL Application Signal was removed
Fixed an Access Violation when deleting channels from the channels list
Fixed an Access Violation when trying to create a standalone setup
Fixed an Access Violation when trying to generate a collection with an entire bus one-shot report
Fixed an Access Violation with certain VehicleScapeDAQ Channels
Fixed ArbIDs for XCPoC not loading correctly from old VS3 Files
Fixed KWP2K messages not starting on VehicleScapeDAQ Online tab the first time
Fixed some GUI Radio buttons that were a little too tiny
Fixed some VSSAL settings not setting the 'Settings have been Changed' flag
Fixed the 'Enable EtherType Filter' checkbox not being 'sticky' between saves
Fixed the flickering for all DTCs in the VehicleScapeDAQ Online tab
Fixed the Gateway 'Clean' button not clearing all messages
Fixed the GUI text for histograms to note that the sample rate is 0.02s
Fixed the Message Update Rate (rel) not working in CoreMini
Fixed the mouse wheel not working when hovering over an edit box in Standalone Logging
Fixed the reliability of 'Log All Updates' in PC Logging
Fixed VehicleScapeDAQ Channel Priority for J1979 PIDs
Fixed VSSAL Collection names from getting lost when the text box lost focus
Having NeoVI MIC on now forces Generate for Wireless Devices on
Histograms now round to 5 digits instead of integers
J1979 Mode $9 Infotypes are now selectable in VehicleScapeDAQ
J1979 PID Requests now work correctly for VehicleScapeDAQ BusQuery
J1979 PIDs now decode correctly when used with Standalone Logging
Optimized CCP polling in VSSAL Scripts
Optimized the Waiting For process for ISO14229 Polling
Optimized ValueCAN.rf's XCP Polling routine
Renamed Bus Query 'Select DIDs' to 'Select DIDs/PIDs'
Restart Required now properly shows on the VehicleScapeDAQ Online Tab when it's needed
Seconds boxes now gray out as intended in PC Logging view
Single Shot Diagnostics has been moved from PC Logging to the Online tab in VehicleScapeDAQ
The DPID watchdog will now wait for any pending requests before restarting the polling function blocks
The ISO14229 Polling VSSAL function was optimized
VehicleScapeDAQ Standalone Logging page has been completely redesigned
VSDB files are now created with the name of the VS3 appended to the front
VSSAL Bus Query hyperlinks for J1979 PIDs now jump to the correct PID
VSSAL Collection names now will remove invalid text from Collection names
When using a one-shot collection, the amount of time to look for each signal is now customizable
 
Video  
Fixed a bug where Video Logging wouldn't work
The Axis F44 is now supported for Video Logging