Intrepid Control Systems Korea
Intrepid Control Systems
            한국 지사 연락처
         ​+82)031-698-3460
  • 홈
  • 회사소개
  • 제품소개
    • 소프트웨어 >
      • Vehicle Spy >
        • Vehicle Spy Enterprise
        • Vehicle Spy Professional
        • Vehicle Spy 고급기능
        • Vehicle Spy 버전별 비교표
      • Wireless neoVI
      • WaveBPS
    • 차량 이더넷 제품 >
      • Automotive Ethernet 완벽 가이드
      • RAD Galaxy
      • RAD Star 2
      • RAD-SuperMoon (1000BASE-T1)
      • RAD Moon (100BASE-T1)
      • Ethernet EVB
    • 차량 네트워크 어댑터 >
      • neoVI FIRE 2
      • neoVI PLASMA
      • neoVI ION
      • neoVI FIRE/RED
      • ValueCAN 4 >
        • ValueCAN4-2 (2 CAN FD)
      • neoVI FLEX
    • 차량 데이터로거 >
      • neoVI FIRE 2
      • neoVI PLASMA
      • neoVI ION
      • neoVI FIRE/RED
    • 기타 액세서리 >
      • neoECU 시리즈 >
        • neoECU 10
        • neoECU 20
      • neoVI MOTE
      • neoRAD I/O
      • Oscilloscopes
    • ICS 차량 네트워크 인터페이스 비교표
  • 자료 / 다운로드
    • Warranty, License, and Policies >
      • Software License Agreement
      • Hardware Driver License Agreement
      • RMA Policy
      • Hardware Warranty
      • Return Policy
    • 사용자 매뉴얼 및 실습 자료 >
      • Vehicle Spy >
        • Vehicle Spy Documentation
        • Vehicle Spy Quick Start Guide
        • Vehicle Spy Guide: Using Ethernet
        • Vehicle Spy 예제
        • ASAP2 Editor Documentation
      • neoVI Hardware (General) >
        • neoVI Hardware Documentation
        • neoVI icsneo40 DLL Documentation
        • Linux API Documentation
      • neoVI FIRE 2 >
        • neoVI FIRE2 사용자 매뉴얼
      • neoVI PLASMA >
        • neoVI PLASMA Documentation
      • neoECUs >
        • neoECU10 & neoECU20 Documentation
      • Ethernet Products >
        • Ethernet EVB 실습 매뉴얼
        • Ethernet EVB 사용자 매뉴얼
        • RAD Moon 사용자 매뉴얼
        • RAD Star 사용자 매뉴얼
    • Vehicle Spy 3 사용법 동영상 가이드
    • 무료 프로그램, 자료, 다운로드
  • 온라인견적
  • 블로그 / 뉴스
  • 교육
  • 위치 및 연락처
  • Vspy Training Resources
  • 개인정보처리방침
Overview
Navigation
Live Capture
Cursors
Importing
Exporting
Decoder Setup
Analysis
Automated Test
Specifications

FlexRay:
Overview
Static Frame
Dynamic Frame
Wakeup
Startup
Physical Layer
Compare to CAN and LIN

CAN Bus:
Overview
Data Frame
Extended Frame
Remote Frame
Error Frame
Bit Stuffing
Physical Layers
Single Wire CAN
Compare to LIN and FlexRay

LIN Bus:
Overview
LIN Frame
LIN Header
LIN Slave Part
LIN Errors
Compare to CAN and FlexRay

Other Buses:
Overview
UART: Kline, J1708, and RS232
J1850
SPI
12C

DOWNLOAD WaveBPS Trial Edition

BUY NOW!
 



















































WaveBPS: Specifications

WaveBPS Application
 
TCP/IP Server Text API allows remote control of application via Windows Clients and Vehicle Spy Function Blocks
Open DLL import support allowing importation of any waveform data from any source
Export support for raw analog waveforms including efficient binary formats (fully open and documented) and CSV for both entire waveform or subset of waveform
Export to Vehicle Spy buffer format
Modification of waveform within software to create improper waveforms for error testing with Arbitrary Waveform Generators
Import and Export WaveBPS XML configuration files
Node Analysis can prepare statistical analysis of all network nodes for all decoders and automatic measurements
Acquisition Modes include Single, Multiple, and Filter Match Capture. Filter Match capture is a multiple capture that stops when there is a filter match.
Automatic buffer capture mode saves buffer every time a filter condition is matched
Automatic Wave file playing on a filter condition
Cursor Modes allow measurement of : Delta Time in Second, Delta Time in Bits, Frequency, Delta Volts, Absolute Volts, and Bus Utilization
High Resolution Cursor allows very fine cursor control for measure across large captures
Auto scroll waveform based on Bit rate or Event with programmable rate
Search, Browse and Filter based on any automatic measurement
Powerful Mouse wheel based waveform navigation with optional knob

Hardware Support
 
Support of PicoScope 5000, PicoScope 4000, Picoscope 3000, and PicoScope 2000 series oscilloscopes: Programmable Capture and Depth, 4 Channel Support, Oscilloscope probes, Triggering, CAN Error Frame Trigger, External Trigger Modes, and Pre trigger depending on the scope model.
Support of neoVI FIRE and ValueCAN3 devices for advanced protocol triggering
Support of Space navigator 3D six axis knob

All Decoders

All Automatic Measurements include the time at which they were taken and clicking on the measurement will focus the zoom view on the times
Automatic Measurements for every event: Time Start, Time Width, Inter frame Separation, Error Count, Warning Count, ID including message description, and Node Name
Database support with import from Vehicle Spy software (UEF, DBC, VS3, LDF, FIBEX, etc...)
User specified Baud Rate and thresholds including inversion
Decoder Templates allow multiple customizations of each decoder with a custom description
Supports Math Operations on multiple channels (A-B, A+B, C-D, C+D)

CAN Decoder

Automatic Measurement for every message: CAN Remote Transmit Request, CAN Identifier Extension Bit, CAN Reserved Bit Zero, CAN Reserved Bit One, Single Wire CAN High Voltage Message, Single Wire CAN High Voltage Ack Bit,Single Wire CAN High Speed Mode Bit Rate, CAN Substitute Remote Request, Length (DLC), CAN CRC Delimiter, CAN Ack Slot, CAN Ack Delimter, CRC Checksum, CAN Stuff Bit Count,CAN Data Section, CAN Bitrate Tolerance , Minimum Frame Voltage, Maximum Frame Voltage, CAN Acknowledgement Bit Skew, CAN Acknowledgement Bit Width, Error Frame Bit Count, Percentage of Time Used For Data
Error & Warning Detection for every message: SRR = 0 Error, RB0 = 1 Error, DLC > 8 Error, Invalid CRC Error, CRC Del = 0 Form Error, Ack Error, ACK Del = 0 Form Error, EOF = 0 Form Error,IFS = 0 Form Error,RB1 = 1 Error,RB0 = 1 Error, Bit Tolerance Limit Error, High Voltage Ack Bit warning, Partial Frame Decode Warning, Error Frame
Automatic Measurements for entire waveform : Frame Count, Error Count, Idle Bus Mean Voltage, Max Frame Voltage, Min Frame Voltage, Bus Utilization, Error Frame Count
GMW3110 Single Wire CAN HighSpeed mode transition decoding
Single Wire CAN High Voltage Threshold setting
User settable Bit tolerance
Satisifies bit tolerance measurments as indicated in GMW14241 - GMLAN Device Test Specification

LIN Decoder
 
Automatic Measurement for every message: LIN Sync Break In Bits, LIN Sync Waveform, LIN Slave Response Time, LIN Header Time, LIN Slave Message Time, LIN TMax Utilization, LIN Frame Length, LIN Check Sum, Data
Error & Warning Detection for every message: TResponse Max Error, Message Length Error, TMax violation Error, Checksum Error, Slave Not Responding Error, Sync Error, THeader Max Error, ID Parity Error, Break Too Short, Break Too Long, Partial Frame Decode Warning
Automatic Measurements for entire waveform : Frame Count, Error Count
 
FlexRay Decoder
 
Automatic Measurement for every message: FlexRay Reserved Bit, FlexRay Payload Preamble Indicator, FlexRay Null Frame Indicator, FlexRay Sync Frame Indicator, FlexRay Startup Frame Indicator, FlexRay Channel, FlexRay Header CRC, FlexRay Cycle Count, CRC, FlexRay Transmission Start Sequence Length, FlexRay Is Dynamic Frame, Data Length in words, Data Section, Min Frame Voltage, Max Frame Voltage, Min Idle Voltage, Max Idle Voltage
Error & Warning Detection for every message: Header CRC Error, CRC Error, Partial Frame Decode Warning
Automatic Measurements for entire waveform : Frame Count, Error Count
Automatic A-B channel detection or fixed channel setting for decoder
 
UART Decoder
 
Automatic Measurement for every message: UART Break In Bits, UART Frame Length, Data Section, Data Section in ASCII
Error & Warning Detection for every message: Partial Frame Decode Warning, Parity Error
Automatic Measurements for entire waveform : Frame Count, Error Count
Break UART Streams into messages based on IDLE bit times
Supports programmable Bit Length, Parity, Stop Bits, Bit ordering, and ID length
 
J1850 VPW Decoder
 
Automatic Measurement for every message: J1850 Start of Frame (SOF) Time in Microseconds, Frame Length, CRC, In-Frame Response Data, Data Section
Error & Warning Detection for every message: CRC Error, Partial Frame Decode Warning
Automatic Measurements for entire waveform : Frame Count, Error Count
Programmable ID length (1 or 3 byte) setting for the decoder
 
SPI Decoder
 
Automatic Measurement for every message: Length of Data, Data Section
Error & Warning Detection for every message: Partial Frame Decode Warning
Automatic Measurements for entire waveform : Frame Count, Error Count
Programmeable SPI Mode, word length, ID length and endianess
 
I2C Decoder
 
Automatic Measurement for every message: I2C Address Length, I2C Read Write Bit, I2C Address, Length of Data, Data Section
Error & Warning Detection for every message: Ack Error, Partial Frame Decode Warning
Automatic Measurements for entire waveform : Frame Count, Error Count
홈
회사 소개
제품 소개
개인정보처리방침


자료 / 다운로드
위치 및 연락처
온라인 견적
블로그 / 뉴스
ICS 메인 사이트:
www.intrepidcs.com (USA)



ICS 글로벌 사이트:
www.intrepidcs.com.cn (China)
www.intrepidcs.jp (Japan)
www.intrepidcs.com (Germany)
www.intrepidcs.com (India)
www.intrepidcs.com (Australia)
인트레피드컨트롤씨스템즈코리아 유한회사 / Intrepid Control Systems Korea, LLC. © 2016  |  대표이사 박경일
Intrepid Control Systems Korea, LLC. is a subsidiary of Intrepid Control Systems, Inc.
외국인투자법인 등록번호: 제 36209 호
사업자 등록번호: 144-81-15345
대표번호 +82 31 698 3460 팩스 +82 31 698 3461
Last Modified 2016/6/23 23:02:15 KST