ValueCAN4-2EL (2 CAN FD, 1 Ethernet, 1 LIN) Specs

Specifications:
Network Interfaces and Features

2 CAN FD channel backward compatible with CAN 2.0
ISO11898 dual wire CAN Physical Layer (MCP2562FD) compatible with DeviceNet and CANOpen
Both Dual Wire CAN channels have NON-ISO CAN FD and ISO CAN FD support.
CAN FD baud rates supported up to 8Mbps
1 LIN channel also configurable for K-Line.
1 DoIP / XCP / Automotive Ethernet port 10/100 Ethernet PHY with low power mode
Compatible with 100BASE-T1/BroadR-Reach® with RAD-Moon Ethernet converter accessory
Software controlled DoIP activation line
Vehicle Spy Trial Setup Tool for baud rates
Software-programmable CAN termination resistance.
Real-time clock for 64 bit time stamping to an accuracy of 25 nanoseconds

Power and Performance

PC Interface

USB operating system support: Windows 7, 8, 8.1,10 and Linux (Linux coming soon). High-speed isolated
Electrically isolated USB connection protects PC from potential damage

Construction, Controls and Cabling

Compact design: 102 x 45 x 31 mm (4” x 1.75” x 1.2”)
Light weight: less than 320g (0.7lb)
Solid anodized aluminum case
Thick rubber boot for shock protection
Integrated 1 meter USB cable with USB type A and C options
Integrated cable-end ruggedized metal connector choice between DB26(1m), OBD2(1.5m), Multi(1m)
Customization of pinouts available
CAN/CAN FD, 1 LIN/K-Line, 1 Ethernet/DoIP Channel status LEDs
USB status LEDs indicating status of device
Ability to control CAN/CAN FD termination resistance
Operating temperature range: -40°C to +85°C

Advanced Features

Device control by external software using three open APIs: neoVI DLL, SAE J2534, and TMC RP1210 A/B.
J2534 compliant for CAN and ISO15765
RP1210 compliant for CAN and J1939
CCP protocol hardware acceleration
Supports listen-only operations
Double buffered CAN transmission
Standalone operating capability

Certifications

Warranty

* 상세 규격은 변경될 수 있습니다. 구매 전 최신 상세 규격을 확인 바랍니다.