RAD Comet 2
10BASE-T1S 통신 분석용 하드웨어
# 10BASE-T1S 2채널
# 100/1000BASE-T1(차량용 이더넷) 1채널
# 100/1000BASE-T(일반 이더넷) 1채널
# CAN (FD) 2채널
# LIN 1채널
- ✔ 다양한 차량용 통신을 지원하는 멀티 인터페이스 장비
- ✔ 10BASE-T1S 통신 분석 시 다양한 기능 활용
- · Special Symbol (Beacon, Commit, SSD, ESD 등) 분석 가능
- · Open Alliance TC10 Sleep/Wake-Up 지원
- · Coordinator, Follow 설정, PLCA 및 CSMA/CD 모드 설정 가능
- ✔ 차량용 이더넷 게이트웨이, 액티브 탭, 자동화 내구테스트 등의 기능 지원
- ✔ 미디어 컨버터로 활용 가능 (10BASE-T1S ↔ 1000BASE-T)
- · WireShark로도 이더넷 패킷 분석 가능
- ✔ 오픈소스 API 제공 (Python, C, C++, C# 등)
상세 사양
| 제품명 | RAD Comet 2 |
|---|---|
| 10BASE-T1S | 2채널 지원 |
| 100BASE-T / 100BASE-T1 | 1채널 지원 |
| 1000BASE-T / 1000BASE-T1 | 1채널 지원 |
| CAN / CAN (FD) | 2채널 지원 |
| LIN | 1채널 지원 |
| PHY 탑재 | 10BASE-T1S (Microchip LAN8671 PHY) / 100/1000BASE-T1 (Marvell 88Q2221M PHY) |
| 전원 공급 | 12V Barrel Jack |
| 작동 전압 | 5.5V ~ 40V |
| 소비 전력 | 5W |
| 작동 온도 | -40°C ~ +85°C |
| PC 인터페이스 | RJ-45 Cable or USB 3.0 |
| 크기 | 약 13.6 x 8.8 x 3.7 cm |
| 무게 | 약 450g (1 lb) |
| 보증 기간 | 1년 |
제품 개요
자동차 연구 기관에서 실사용 중인 하드웨어입니다.
다양한 차량용 통신을 지원하는 멀티 인터페이스 장비입니다.자동차 연구 기관에서 10BASE-T1S 분석용으로 사용되고 있으며 게이트웨이, 액티브 탭 등의 기능을 활용할 수 있습니다.
차량용 이더넷 미디어 컨버터로 활용 가능합니다.
· 10BASE-T1S ↔ 100/1000BASE-T(일반 이더넷)· 10BASE-T1S ↔ 100/1000BASE-T1(차량용 이더넷)
· 100/1000BASE-T ↔ 100/1000BASE-T1
미디어 컨버터로 활용 가능합니다.
장비 전면의 버튼과 LED만으로 통신 상태를 실시간 확인할 수 있습니다.
제품 전면의 버튼을 통해 상대물과의 통신 연결, PHY 모드 전환, 링크 충돌 중재 방식인 PLCA 상태,
SQI, gPTP 상태 표시 등을 확인할 수 있어 테스트 환경에서 유용하게 대응할 수 있습니다.
Link Speed와 Duplex, 10BASE-T1S 설정이 간편합니다.
소프트웨어를 통해 차량용 이더넷의 Link Speed와 Duplex를 손쉽게 설정할 수 있으며,
10BASE-T1S 통신의 PLCA 및 종단저항 설정도 클릭 한 두번으로 간단히 설정할 수 있습니다.
소프트웨어 연계 기능
Stand-Alone Gateway
Elaborate gateways can be implemented between any of the networks available on the RAD-Comet 2.
CAN/Ethernet Gateway
Payloads can be extracted from frames arriving on one network, placed into a different PDU structure with a different header and sent to another network.
Examples of this utility include (but not limited to):
· Networking devices from different architectures for a proof-of-concept· Networking devices during the transition from one vehicle architecture to the next
· Streaming select (or all) network traffic for logging and analysis
Ethernet/Ethernet Gateway
Frames can arrive on one Ethernet network and sent out to another network directly, or after changing anything in the header or payload.
Simulation and Scripting
Using Vehicle Spy you can define transmit messages on any network with custom data and send them manually or on a schedule of your choosing.
You can also write intelligent scripts that implement arbitrary logic and compile them into embedded scripts which can run within the device itself.
This functionality allows you to create specialized test scenarios, and to simulate ECUs and gateways.
PHY Register access
In any mode, each PHY can be accessed by the embedded processor over MDIO in order to read and write configuration registers.
사용 예시
사용 매뉴얼 (영문)
브로셔 다운로드 (영문)