neoVI FIRE 2
CAN (FD), LIN 후분석을 위한 인터페이스 및 데이터 로거
# CAN (FD) 8채널
# LIN 4채널
# 100BASE-TX Ethernet:DoIP/XCP
- ✔ CAN (FD), LIN, 100BASE-TX Ethernet(DoIP)를 지원하는 인터페이스 장비
- · CAN (FD)은 SW CAN or LSFT CAN or DW CAN로 설정 가능
- ✔ 차량 주행데이터 취득을 위한 장비단독로깅 기능 지원
- · 최대 1TB까지 SD카드 확장 가능
- · 외부 악세사리(MIC2)를 통해 임의 시점에 트리거 로깅 기능 지원
- ✔ 자동화 내구테스트를 위한 장비단독동작 기능 지원
- ✔ 오픈소스 API 제공 (Python, C, C++, C# 등)
상세 사양
| 제품명 | neoVI FIRE 2 |
|---|---|
| CAN / CAN (FD) | 8채널 지원 |
| LIN | 4채널 지원 |
| 100BASE-TX Ethernet(DoIP) | 1채널 지원 |
| 지원 프로토콜 | CCP/XCP/GMLAN/J1939/ISO15765-2 등 |
| 전원 공급 | DB-26 Connector |
| 작동 전압 | 4.5V ~ 40V |
| 작동 온도 | -40°C ~ +85°C |
| PC 인터페이스 | USB-B Cable |
| 크기 | 약 13.8 x 8.7 x 3.5 cm |
| 무게 | 약 340g (1 lb) |
| 보증 기간 | 1년 |
제품 개요
PC연결 없이 차량 데이터를 취득할 수 있는 데이터 로거입니다.
차량의 주행데이터 취득을 위한 데이터 로깅 기능을 지원합니다. 뿐만 아니라, PC연결 없이 장비를 대상물과 연결하여 장비 단독으로 데이터 로깅 또한 지원합니다.
장비의 LED만으로 통신 상태를 실시간 확인할 수 있습니다.
장비 전면의 LED를 통해 각 네트워크 채널의 데이터 전송 상태와 스크립트 실행 여부,트리거 실행 여부 등을 실시간으로 확인할 수 있습니다.
BaudRate와 종단 저항 설정이 간편합니다.
소프트웨어를 통해 BaudRate와 종단 저항도 클릭 한 두번으로 손쉽게 설정 가능합니다.
소프트웨어 연계 기능
Stand-Alone Logging, Scripting, and Simulation
In addition to working as a PC interface, the neoVI FIRE 2 can operate in standalone mode.
It can run real-time scripts, log data to a removable microSD card, and simulate ECUs and gateways.
With these features, it is also possible to run a script to reflash ECUs using data from the microSD card.
neoVI DLL, J2534, Linux, and RP1210 Support
Since some users prefer to write their own software, the neoVI FIRE 2 supports three open APIs: neoVI DLL API, SAE J2534 API, and TMC RP1210 A/B.
The neoVI DLL API includes examples for all popular development environments, including C#, VB.NET, VB6, Delphi, C++ Builder, Visual C++, LabVIEW, and LabWindows.
Examples and drivers for both Windows and Linux are available.
Vehicle Spy Enterprise Software
Intrepid’s Vehicle Spy Enterprise software fully supports the neoVI FIRE 2. With Vehicle Spy, users can monitor and transmit on all neoVI FIRE 2 networks simultaneously.
Vehicle Spy is required to configure standalone mode. Users can take advantage of the powerful interface to load databases and to write and debug scripts before downloading them to the device.
Hardware-in-the-Loop Real-Time Performance
The neoVI FIRE 2 includes a real-time scripting engine that can be used to perform real-time messaging.
For example, an engineer creating an application can load a script into the hardware and interface with the script variables, allowing microsecond-level measurement and control.
Through a new feature called hardware acceleration, Vehicle Spy can also be configured to send real-time functions to the device, such as periodic messaging, replay, or scripting.
Logging Features
The neoVI FIRE 2 is capable of logging to a removable microSD card, which uses a real-time, fail-safe FAT32 storage system for reliability and PC compatibility.
The FIRE 2 also has a real-time clock to hardware timestamp all messages.
Finally, a robust power management system automatically powers down the neoVI FIRE 2, and can wake the device again based on network activity or the connection of a PC.
The Evolution of the Original neoVI FIRE
While the neoVI FIRE 2 was developed primarily to provide new vehicle networks and features, it also provides significant improvements over its successful predecessor, the original neoVI FIRE.
These include a more robust case and connectors, much larger script space, SD card data offload over USB, the ability to power the device from USB during configuration,
support for a larger voltage range, and an expanded voltage range on MISC I/O channels.
사용 예시
사용 매뉴얼 (영문)
브로셔 다운로드 (영문)