Vehicle Spy 3 신규버전 출시! (701.82)

Vehicle Spy 3 사용 고객 여러분께,

저희 인트레피드 컨트롤 씨스템즈의 대표적인 소프트웨어인 Vehicle Spy 3의 신규 버전이 출시 되었습니다.

유효한 라이선스를 가지고 계신 고객이라면 무료로 다운로드가 가능하며 만료된 라이선스로 사용 중 이신 고객이라면 유지보수 갱신 후 사용 가능합니다. (나의 Vspy 라이센스가 유효한지 알아보기)
유지보수 갱신 관련 문의는 ICS Korea 로 연락 주십시요.

이번 버전에서는 주로 FIRE2 관련 기능들이 개선 되었고 기타 여러 bug 들이 fix 되었습니다. 
상세 릴리즈 노트는 아래 "Read More" 를 클릭해 주세요. 

Vehicle Spy 3 version 3.7.1.73 to 3.7.1.82 Release notes
Limitations / Errata 
 Do not use this version with WirelessNeoVI.com. It is not compatable with version v700 firmware in the ION and Plasma when using WirelessNeoVI.com
FIRE2 functionality is limited to PC mode only.  No stand-alone features available yet.
RAD-Galaxy cannot be used for FSA / TCP/IP testing.  Vehicle Spy 3.7.0.114 must be used with the RAD-Galaxy
 
Bug Fixes 
FirmwareFixed a bug where Fire2 wouldn't show an error when no ACK was detected
Fixed a Fire2 Lockup when disconnecting and reconnecting
Fire2: HSCAN6 and HSCAN7 now connect to the correct pins
Fixed a bug where any LIN bus errors on LIN 3 or 4 could crash the LIN Bus
Fixed a bug where the Fire2 would stop reporting received messages
FSAFixed a crash when using the FSA Replay Wizard
Graphical PanelsFixed a crash in Graphical Panels when trying to use the Messages View before it was open
J2534Fixed a bug when using J2534 for Serial Data Suite
MainFixed a problem log when reopening a VS3 with "Unknown Diagnostic Job"
Fixed a loading issue if a file had a space before the extension.
Fixed some bugs with the Database Mismatch dialog
Now supporting MDX / GDX version 4
Allow Seed and Key size to be changed independently with Extensible Security
Fixed a bug where the ECU Setup Wizard would erroneously show up
Fixed a crash with a certain VS3Zips with certain diagnostic jobs
Fixed a bug that would freeze Vehicle Spy when trying to send a CoreMini
Fixed a bug that caused bytes of large TCP/IP transfers to not be decoded correctly
Fixed an Access Violation when changing ECU IDs
Fixed a bug that caused certain Function Blocks changed by Signal FixUp not to work
Fixed a crash when changing certain Tx Messages speeds while online
You can now subtract static values in CoreMini
Fixed a bug that showed errors when using GM CySMAC with the same ArbID on 2 networks
Fixed a bug with the HTML Report in the Log Data Function Block Command not being populated
Fixed an Access Violation when removing FSA Transmit Frames
Fixed a bug where any Signal Properties affected by the Signal Fixup Wizard were broken
Fixed a crash when using Signals on Ethernet Messages past byte 64
Vehicle Spy will now use net72 for Ethernet if a VS3 doesn't have a network defined
Fixed LIN Importing with Global B ARXML Files
Fixed a bug where a setup imported into v701 was too large for CoreMini
You can now disable the Diagnostic Lights for the VCAN.RF
VCAN.RF will now properly sleep if there is no bus traffic
Fixed up the way that messages belonging to multiple GMLAN ECUs are imported
Fixed a bug where VCAN.RF wouldn't reconnect after waking
Fixed the default of GMLAN Custom Signals to be 8 bits again
Serial Numbers with Text Characters (i.e. Fire2) now display correctly in Tools > Options > Licenses
Fixed a crash when sending CANFD messages with 64 bytes
Fixed a bug where the signal fixup wizard would be triggered before the platform was loaded
Fixed an Access Violation when using an invalid MACT File
Fixed a bug where certain VCAN3s couldn't go online
Fixed some signals not loading correctly in ARXML Files.
MEPFixed an issue where certain A2L files would not import
Fixed a crash with certain types of A2L Files
VehicleScapeDAQFixed an Access Violation when pasting channels in VehicleScapeDAQ
 



Vehicle Spy 3 version 3.7.0.114 to 3.7.1.73 Release notes
Major New Features 
 CAN-FD support throughout Vehicle Spy.
Added support for ValueCAN.rf (non-wireless).
Added support for neoVI FIRE2.
Added support for neoVI FLEX.
First release of 64-bit icsneo40.dll
Create and receive TCP/IP streams on Ethernet networks (with DHCP and AutoIP support)
New view: FlexRay Clusters.
New view: FlexRay Cycles.
Enhanced ARXML support.
VehicleScape DAQ list capacity visualizations.
J1979 is now supported in Diagnostics and VehicleScape.
New DBC compare tool added (In Tools -> Utilities)
New "GM FSA Replay" generator to replay one half of an FSA conversation
 
Limitations / Errata 
 Do not use this version with WirelessNeoVI.com. It is not compatable with version v700 firmware in the ION and Plasma when using WirelessNeoVI.com
FIRE2 functionality is limited to PC mode only.  No stand-alone features available yet.
RAD-Galaxy cannot be used for FSA / TCP/IP testing.  Vehicle Spy 3.7.0.114 must be used with the RAD-Galaxy
 
Bug Fixes 
C Code InterfaceEthernet now supported in C Code Interface.
CAPL ConverterFixed a crash on certain projects converted with the CAPL Converter
Fixed an access violation when trying to go online with a CANoe-converted project.
EthernetAdded a signal for current VSpy IP/MAC addresses.
Changed the order of Ethernet header tabs in the Messages Editor to be easier to use.
Coremini now limits an Ethernet transmit message to 1514 bytes to prevent issues with EEVB
Default values for Ethernet Tx messages are now formatted properly.
Ethernet rate now displays in Networks view in Bits / sec
Ethernet Transmit message Source and Destination addresses are now decoded correctly.
Fixed an error popup when switching from HS CAN to Ethernet in Messages Editor.
IP/MAC address display now follows a more legible format.
Prefix for TCP networks in expanded data within Messages View is now "Data:".
Raw Payload Bytes now changes depending on the network being used.
Signals are no longer assigned default (and possibly incorrect) formats.
Signals are no longer assigned default formats.
Stream to disk feature now works with Ethernet.
Stream to Disk now works with Ethernet traffic.
TCP Data in PCAP files now show in the TCP network in Vehicle Spy.
TCP discovery messages are sent out properly.
The labels for Ethernet messages in the Tx Panel are now left-aligned.
Updated support for TCP Tx/Rx messages.
Updated the methods that DoIP messages are decoded.
Vehicle Spy no longer resets TCP Connections that it didn't create
Vehicle Spy now can have Ethernet on even if there's no NIC on the PC.
Vehicle Spy now supports DHCP and AutoIP for DoIP.
You can now filter by Ethernet Port for IP frames.
You can now filter Ethernet messages with wildcards.
Fixed Ethernet timestamps if not using UTC time
PCAP Files now show the Network Fix-up window when loading
Extract/ExportDefault Extract / Export location is now set to the user's Data Directory
Exported log columns are no longer shifted to the left when there is invalid data.
Extractor can now handle VCAN.RF extractions with more than 4k files.
The Linux exporter can now export FlexRay data without crashing.
Fixed a bug where a DID wouldn't be exported when also used in Channels list
FirmwareFixed a bug when using DPS command "Get Controller Info" on HSCAN
DPS can now flash over SW CAN
FlexrayFixed an access violation when sending from an incorrect FlexRay Cluster channel.
Vehicle Spy now properly pulls FIBEX data configuration from a VS3 File.
FSAFixed an issue where a FSA Database wasn't being seen on startup until the platform was reloaded
Fixed an issue with FSA Replay when connected nodes didn't respond in the correct order
Fixed typos in the FSA Replay Wizard.
FSA UDP frames are now decoded when online
FSA Heartbeat messages are now displayed correctly in Vehicle Spy
Fixed a crash when using the FSA Replay Wizard
Graphical PanelsFixed a bug where labels could get to a state where it wouldn't update if it was tied to a signal
Fixed a bug where the default color of the bar in Graphical Panels wouldn't save correctly and reset
Array values with index greater than zero now save to the VS3 file correctly.
Fixed a bug where a Graphical Panel Backcolor box could be typed into.
Fixed a crash when editing Graphical Panel elements while online
Fixed a possible crash when using a misconfigured Graphical Panel button.
Fixed an access violation when opening certain VS3Zips that were using the Grid tool.
Graphical Panel Graph control now links to Signal Plot properties.
LED Off color white now persists on Graphical Panel after saving.
The font and size of a dropdown list can now be modified on a Graphical Panel.
HardwareVehicle Spy now generates an error message if trying to transmit on a non-existent network
J2534Fixed RTC for ECU Response time for J1699/J2534 DLL.
Fixed a bug when using J2534 for Serial Data Suite
JavaNode name no longer disappears when switching from Tree to List View in the ECU Jobs view
Main"Save Platform Changes" dialog will no longer flash if you click the grey area of Signals in ECU View
A warning is now displayed if attempting to save to a VS3Zip in a temp directory.
Added a DBC Compare Tool to Vehicle Spy.
Added a new Text API Command to get ECU Platform Index by using ECU Description.
Added support for VSB to BLF conversion for Automotive Ethernet.
Added the ability to 'clear' text signals by using Set Value = "".
Added the new Expression Builder selection "Message BX".
AIN VNET Report Interval no longer gets added as 'Keyboard F6' in Expression Builder.
Capture blocks now save with a sub-second resolution in file names.
CGI Bus message dialog now defaults to blank values.
Changing networks in the Messages Editor now properly refreshes the message list and selection.
Clicking the 'Value' column for 'Else' commands no longer produce 'Unknown Command' box.
Converting Text Bus capture to Signal Log no longer has the first line as zeroes.
CoreMini Console now shows SD Card size as "GB" instead of "G"
Custom Format will now grey out correctly when the box is not checked in the Expression Editor
DBC File is re-read for the current session after saving newly-added DBC file.
DET/ASL now does not reflash every use with Plasma or Ion.
Dragging and dropping transmit messages to the Signal List no longer causes decoding to be lost.
Dropdowns in messages editor no longer overlap anything else.
Escape now works to cancel out the Src Node column in the Messages Editor
Expression Builder now no longer overwrites headers on certain protocols.
Extract/Export Notes.txt now displays end time.
Fixed "Invalid Cell" issue when using Virtual Networks view.
Fixed a bug in ECU Exporter where an ODX would not be exported correctly
Fixed a bug where a disabled transmit message wouldn't multiplex correctly in MEP
Fixed a bug where a VS3Zip wouldn't find the internal database
Fixed a bug where Capture Function Block data wouldn't get stored.
Fixed a Bug where clicking Advanced Options in NeoVI Explorer wouldn't show the additional options
Fixed a bug where copying and pasting a Diagnostics job could prevent the name from changing.
Fixed a bug where DID signals could disappear on load.
Fixed a bug where ISO 14229 IDs would get imported incorrectly
Fixed a bug where Security Access ($27) could only be modified once.
Fixed a bug where selecting binary mode in the message editor could cause the popup to close.
Fixed a bug where State Encoded variables wouldn't copy and paste over correctly
Fixed a bug where SW CAN with mixed mode would miss the first data byte.
Fixed a bug where the node name would disappear after switching ECU View from Tree to List View
Fixed a bug where VehicleScapeDAQ PC Logging would create empty data files
Fixed a CoreMini Console crash with playback-type function blocks.
Fixed a crash dialog on closing Vehicle Spy.
Fixed a crash if starting Vehicle Spy with an Ethernet device not properly connected
Fixed a crash if Vehicle Spy saw more than 2 ^ 31 messages when going offline.
Fixed a crash when trying to use VSB Splitter on an already open file.
Fixed a crash with "GetTickCount64 could not be located" when using Windows XP
Fixed a GUI issue in the Messages Editor where objects could become blocked.
Fixed a memory leak when transmitting CAN-FD frames in Simulation Mode
Fixed a possible crash if user doesn't have WinPcap installed.
Fixed a possible crash when playing back CPU-intensive scripts.
Fixed a possible loop issue with Combine VSB.
Fixed a refresh error when a diagnostic job was deleted and a new one was added.
Fixed a typo in the Vehicle Spy Splitter Error Dialog.
Fixed an Access Violation if you clone an unsaved ISO Job
Fixed an access violation if you tried to cancel loading a Vehicle Spy Professional file with Basic.
Fixed an Access Violation when changing hardware in the Networks view
Fixed an Access Violation when clicking a certain area in the ECUs View
Fixed an access violation when deleting a digital or state-encoded signal in Expression Editor.
Fixed an access violation when opening a specific CSV file.
Fixed an Access Violation when using icsneo40.dll
Fixed an Access Violation when using the CSV to ASC tool with custom named networks
Fixed an erroneous "Problem replaying a message" problem log when trying to use a Fire.
Fixed an error if post-trigger size was smaller than the buffer size in a capture block.
Fixed an error where a ECU Routine signal wouldn't save to the platform properly
Fixed an error where split VSB would create too many files.
Fixed an incorrect DLL path after a WiVi Host Server 32-bit update.
Fixed an issue when docking a window in Extract / Export having files get lost if there were a lot
Fixed an issue where Capture FB wouldn't decode ISO 15765-2 Rx Messages.
Fixed an issue where drag and dropped files wouldn't load in Review Buffer correctly.
Fixed an issue where multi-frame messages wouldn't be decoded.
Fixed an issue where the Wait For step in older VS3 function blocks could get ignored.
Fixed an issue with Wireless NeoVI not displaying DTCs properly.
Fixed an OLE error when clicking a certain area in the ISO14229 Security tab in ECUs View
Fixed an OLE Error when deleting a network.
Fixed import on ARXMLs.
Fixed import with CCD Files.
Fixed issue with extremely short (<1 second) collections from being treated as overlaps in WiVI.
Fixed message padding on CAN-FD Frames.
Fixed problem log entries if neoVI network was a different index than net8.
Fixed text going off screen in the ECU Setup Wizard
Fixed the CoreMini compiler to scale uS waits to mS.
Fixed the GUI for Setup Data Cache Disk Streaming to be easier to understand.
Fixed the icon for Multiframe Setup when it's disabled.
Fixed the responsiveness when editing the Transmit Panel
Fixed typos in hardware acceleration popup.
Fixed Video Frame Review so it works with the new video extraction format
For consistency with other script commands, 'Start Loop' and 'End Loop' no longer change to 'Start a loop' and 'End the last loop'.
GGDS MDX files are now imported correctly.
If a VS3 has platform data inside, the program will now switch to the platform if available.
Importing a Job from a VS3DJ file now creates a new index instead of the copied one.
Invalid platform name now shows an error.
J1939 Function Block command "Test DTC" now works correctly.
LDF Tool now updated for newer LIN Versions.
Linux update button will no longer be enabled if there is no update available.
Login View now has multiple device selection.
Mouse icon no longer gets stuck on a hourglass when using the CoreMini Console
ODX Import with DiagRA installed now works correctly.
Plasma / Ion now goes to sleep after 20 minutes of Inactivity.
Plasma / Ion will no longer sleep if USB is connected.
Platform dropdown in VehicleScapeDAQ now freezes if using a .VS3Zip.
Pressing F1 when in a menu now opens the main help page.
Problem log entries are no longer generated when stopping a capture block that didn't save anything.
Reloading an A2L File from a VS3ZIP no longer prompts a platform save.
Removed "n/a" from Value field of FB Stop command.
Removed NeoECU emulator.
Restore Program Defaults button no longer causes crashes.
Reworded the GUI for 'Setup Data Cache Disk Streaming' to be more clear.
Rx/Tx thread priorities are now implemented in Linux.
Save platform button no longer flashes when there is no loaded platform.
Search function now works under Logger branch of the Expression Builder.
Selecting the DAQ branch by itself in Expression Builder now shows the correct properties.
Simulator now works with ARXMLs correctly.
Snapshot now displays DID Information correctly on certain ECUs.
Split VSB utility now works better with Ethernet / CAN-FD / GMFSA / FlexRay.
Split/Combine VSB Tool now shows minimum file size.
Statistics Tab now shows rate as msg/s.
Streaming Buffer Review no longer causes null pointer exceptions.
The DLC value in the messages editor can now be deleted.
Tools and Utilities menu has been rearranged for ease of use.
Trying to save Ethernet messages in a CSV now properly displays an error (Only supported on VSB / PCAP)
Vehicle Spy now shows a problem log if trying to go online with a NeoECU20
Vehicle Spy now shows error dialog if DBCompare.exe is missing.
Vehicle Spy now starts more quickly.
Vehicle Spy online animation now works even if the PC has been running 24.86 days or more.
VehicleScapeDAQ Channels now properly shows the correct property of the DAQ item
VehicleScapeDAQ will no longer drop out of hardware acceleration if stopped and restarted.
Will no longer be able to select 'Append App Signal to File Name' when no app signals exist.
Vehicle Spy now saves data by default in .VSB Format
Importing PCAP files now lets you choose if it's Ethernet DAQ or TCP traffic
.VSB is now the default file format when saving logs
FSA Heartbeat Messages are now displayed correctly
Fixed a bug where the checkbox for "Save as Binary File" wouldn't persist across saves
Fixed an Access Violation when modifying the Language in Vehicle Spy
Fixed an Access Violation when creating a Tx ECU Panel with no ECU defined
Fixed a possible access violation in the "Select Signal" menu
Copyright date is now up to date for 2016!
Fixed an Access Violation when deleting user jobs from ECU View
Fixed an Access Violation when opening invalid Ethernet ASC files
Fixed a crash when trying to use VSB Splitter on a currently in use VSB
Fixed a bug where Multiframe messages would not be filtered by Custom Filters
Fixed a bug where TCP Data wouldn't decode if the address matched Vehicle Spy's IP
Fixed an Access Violation after checking "Force Specific Length" option
Fixed a typo for a DLL Error
Fixed a bug with dropdown lists getting their height set to 0 after reopening a file
Fixed a bug when importing GDX files
Fixed a List Index out of bound Error with Capture Function Blocks
Vehicle Spy will now alert you from now onif you last saved a file in a version newer than the one you're currently using
Fixed a problem log when reopening a VS3 with "Unknown Diagnostic Job"
Fixed a loading issue if a file had a space before the extension.
Fixed some bugs with the Database Mismatch dialog
Now supporting MDX / GDX version 4
Allow Seed and Key size to be changed independently with Extensible Security
Updated Beta Splash copyright to 2016
Fixed a bug where the ECU Setup Wizard would erroneously show up
Fixed a crash with a certain VS3Zips with certain diagnostic jobs
Fixed a bug that would freeze Vehicle Spy when trying to send a CoreMini
MEPAdded some speed improvements for A2L File loading and searching.
Cleaned up the A2L import function.
Connect using MEP now properly uses hardware acceleration from MEP view.
Fixed manual multiplexing for XCP
Fixed the MEP Init sequence when using standalone logging
MEP A2L Arrays created with older setups now will fix up to the new style.
MEP now uses ECU name and description from A2L File.
Opening MEP goes to the Setup tab instead of the Security tab.
Fixed an issue where certain A2L files would not import
Fixed a crash with certain types of A2L Files
Messages ViewFixed a bug where Messages View messages in scroll mode would sporadically disappear
Fixed a bug with the yellow highlight in the Reversing tab
Fixed a possible crash when a corrupted file is loaded.
Fixed access violations if you pressed count while there were bus errors.
Fixed an issue where certain features weren't enabled with a demo license.
Fixed an issue with the Messages View not updating during Pause / Review buffer.
Fixed the timestamps for split VSBs.
Messages and Signals can now be copied from one instance of Vehicle Spy to another
Messages no longer disappear when you press pause.
Messages View "Reversing" view now works with more than 4 bytes at a time
CAN-FD Messages now label as CAN-FD instead of USDT in the Messages View
neoVI DLLSlave VNETs can now be accessed by the API
Post-AnalysisFixed a crash with Data Analysis with some Ethernet and Platform setups
Removed support for multiple file data analysis.
VehicleScapeDAQFixed a bug where a virtual triggered message wasn't created, causing a VS3 to not go online
Fixed a memory leak when importing CAL files
Added J1979 Support in the Diagnostics View
Added Plot Signal and Monitor Signal to the VehicleScapeDAQ Online Tab.
Can now create VehicleScapeDAQ decodings that are outside of normal ranges.
Cleaned up and reworded GUI for VSSAL Advanced options.
Fixed an access violation when moving Channel items in VehicleScapeDAQ.
Fixed an error where NRC $78 could confuse VSSAL.
Fixed an issue where state-encoded signals weren't logged correctly in VehicleScapeDAQ PC Logging.
Fixed an issue where VehicleScapeDAQ periodic signals would stop in the window.
Fixed an issue where Vscape PC Logging would save with incorrect format and units.
Fixed an issue with VehicleScapeDAQ PC Logging where signals weren't saved with units.
Fixed text alignment in VehicleScape CCP Polling when using Windows Classic theme
Fixed the right click menu in the VehicleScapeDAQ Channels Tab to work correctly
Normal Mode messages will now no longer force the 'Always DAQ' checkbox.
Removed 1000-channel restriction in VehicleScapeDAQ; this is now memory limited.
Restarting in VehicleScapeDAQ Online tab now only restarts the DAQs, not the whole project.
Tweaked VehicleScape DAQ List allocation to load all DAQs simultaneously.
VehicleScapeDAQ now uses less memory during runtime.