neoECU 20 Overview | 브로셔 다운로드

Scriptable Embedded ECU Replacement for CAN and LIN

neoECU-20: 4xDWCAN, 1xSWCAN, 1xLSFTCAN, 4xLIN
Intrepid Control Systems introduces neoECU 20, a rapid prototyping tool for CAN and LIN ECUs. neoECU 20 can be setup to control and measure automotive signals in minutes. ECU logic is defined in function block modeling scripts, allowing you to arrive at a workable ECU early in design. Now you have the ability to test your ECU models and accurately create simulation environments without C Code.

Applications For neoECU 20

• Try out new algorithms early in the design process.
• Gateway CAN and LIN signals.
• Integrate into ECU load or ECU test boxes to make them intelligent.
• Allow application engineers who are not C programmers to try out new ideas.
• Create custom test instruments.
• Convert CAN or LIN signals to analog and vice versa.
• Simulate a real ECU environment with dozens of low cost nodes.

General Purpose I/O and Expansion
The neoECU 20 has six general purpose I/O lines. Each line can be programmed to a digital input or output of which four can be analog inputs. One digital line can generate a PWM and another can measure a PWM. All of these I/O can be measured or controlled by both the PC host application or the embedded real-time scripting engine. For example, very precise timing measurements can be made using script for I/O to Network message timing applications. The DB9 Connector also include two power pins to power an external device like a trigger pendant, wireless gateway, or graphical display.

neoECU 20 25핀 단자쪽 이미지

neoECU 20 9핀 단자쪽 이미지

neoECU 20 의 25pin 단자 핀정보

neoECU 20 의 9pin 단자 핀정보

Vehicle Spy 3 의 간편한 UI 기반 Function Block 스크립팅 기능을 통하여 CoreMini 스크립트를 만들어 neoECU 20 에 심을 수 있습니다. CoreMini 스크립트가 프로그램된 neoECU 20 은 전원만 인가해주면 독립적으로 (Standalone Mode) 스크립트를 실행하게 됩니다.